Robot Vacuum

How to Clean Carpet with Vinegar | Vacuumsbrand

How to Clean Carpet with Vinegar

Sometimes, when it rains, and your pet decides to go outside and likes to tarnish his precious paws with the lousy mud. The pet just not going to do his filthy business. Yes, he will come again to home and will defile some part of the carpet.

This makes you angry, and you don’t know how to clean this stubborn stain. It can be removed through vinegar, and if you don’t know how to clean carpet with vinegar, then I will guide you on how you can do it.

Everyone will agree that carpet cleaning is not an easy task. Many people opt to give this task to any cleaning company, but it could be time taking.

Probably, you have heard of cleaning stains with vinegar. People use it to remove stubborn stains like ink stains from carpets, clothes, or furniture.

There are many ways you can clean stains with vinegar by combining them with other ingredients. But the solution’s effectiveness depends on the nature of the stain and the surface where it has happened.

Removing the stains from the carpet isn’t an easy task. Sometimes if the stain is hard, then it could be difficult to remove. But it would be best if you didn’t lose hope and keep trying the simple ingredients that you have in-home to remove the stain.

Clean Carpet with Vinegar

Here we go, the most awaited process of cleaning the carpet with vinegar. It is an easy task if you follow the below steps:

Vacuum the Carpet

The first step to removing the stain is to vacuum the carpet from the affected area. This process is done to remove any loose dust or dirt from the affected area.

If you don’t vacuum it and apply the liquid directly on a dusty surface, it can make the stain harder to clean. That’s why we prefer to vacuum the carpet first.

Vacuum the carpet from both sides thoroughly and eliminate all the dirt and dust from it. It will make it easy to remove the stain.

Making Vinegar Solution

The next step is to create the vinegar solution that is best to remove the stain. It is a critical process as too little quantity of vinegar will not do anything, and too much vinegar quantity can damage the carpet.

Take a bucket and pour warm water into it. Add a sufficient amount of liquid dish soap and three to four cups of vinegar. Always try the solution to any separate part of the carpet that is not visible. This is done to check whether it is harmful or not.

Scour the Carpet

It is the main part where you apply the solution to the affected area. You can do this using a soft cloth or a brush. You can also use a sponge for this purpose, but it should be a non-shedding one. Dip it into the solution and scrub/scour it gently on the affected area in linear motion. Try to go in the direction of the nap.

If you are cleaning a short area, then it’s OK, but if you cover a large area, it can take time. Make sure every part of the affected area is covered. Do this job patiently and softly. Please don’t rub it hard.

Rinse the Carpet

This is the must-do step that you can’t leave. If you don’t rinse the vinegar solution from the carpet, then it can cause a bigger stain.

If it is a small affected area, then rinse it with a wet cloth. Just dip the cloth in water and apply the same motion that you are done applying the solution.

But if it all carpet, then take it outside and rinse with running water using a hose. Hang it at a high place until the last drop of the solution falls out.

Drying Carpet

After applying vinegar solution and rinsing the carpet, now it’s time to dry. The best way to dry it take it outside and dry it in direct sunlight. It will dry the carpet quickly. Flip over the side, and at the end, make sure the carpet is completely dried.

If the carpet is sensitive and you fear losing its color, keep it inside and open the windows to let the air in. You can also open the fans to dry it quickly.


Read More:


Guide for Cleaning Carpet with Vinegar

Removing Stain

While removing the stain, Scoop off any solid matter on the carpet before applying the vinegar solution. Before applying the solution, make sure the carpet absorbs the liquid.

Spray little by little on the affected area and blot it with a towel or clean, soft cloth. Repeat the process until the solution is applied, and at the end, dry it well.

Steam Cleaning

If you have a steam cleaner at home, then it’s straightforward to clean the carpet. Just add vinegar solution where you add any other cleaning solution in a steam cleaner.

You know well how to use a steam cleaner. If there is some odor of vinegar, then don’t be a worry. It will go off when it dries.

Deodorizing

If vinegar is still smelling, add one teaspoon of baking soda with one tablespoon of vinegar and two warm-water cups. Add the solution to the spray bottle. Shake it well and lightly spray on the stain. After applying this solution, be patient; the smell will go off when it dries.

Read More Articles:

Conclusion

In this article, we explained how to clean the carpet with vinegar step by step. Vinegar is one of the best cleaning solutions that are effective since times. It is easily available at home and will be a handy product that will save you money and gives you the best possible results.

It’s crucial to try the solution first in a separate place. If you apply the solution step by step as defined, you will achieve the best possible results.

Concluding it, this formula works on so many spills, everything from baby poop to party punch. The formula will work 100% if the stain is relatively fresh. If you don’t like the smell of vinegar, then try citrus-infused cleaning vinegar. This will add a pleasant smell and also work effectively.

Read More Articles:

Similar Posts